Used some clamps to hold everything in place while I installed the AN4-6A bolts and temporary nuts to hold the Vert Stab on.
Ta-daaaa - just a trial unfortunately...
The centre hole here is the alignment hole while the other two are the match-drilled #12's
And the lower bolts holes deburred...
Not much more to do with the Vert Stab for a while now. Only have the top sections of the aft fuselage left before the whole project gets shelved while I find somewhere to expand to.
Dimpling the Top Skin...
Hmmm, that ain't going to work very well...
Had to shave a little off the dye so it wouldn't scrape the flange...
Here's the difference...
It's much easier doing these ones using the back plate and rivet gun.
Got to be careful though, as it's very easy to squish these too far...
No comments:
Post a Comment